Reply To: 5v regulators to power the beaglebone
Don’t mind this post. It started working after some configuration :)
View ArticleHow to set fan output to be always on?
I’m assuming that I can use this in my config file, however I don’t know what the units are? is this the PWM value so 255 would be always on? [Fans] default-fan-0-value = 0.0 default-fan-1-value = 0.0...
View ArticleReply To: Help picking nema motors?
I use Nema 17 motors on two printers and have never had problems with them burning out or starting fires. I think 23s are too big for most printers. The other thing to consider that the stepper...
View ArticleBBB Shutdown/Restart through Octoprint.
Does anyone know how to get octoprint to initiate shutdown on the BBB. I’ve tried a bunch of things with no luck. I have the Server settings for shutdown: sudo shutdown -h now but when I click on...
View ArticleReply To: Cancelling prints.
+1 I agree this would be a nice feature to have. At least some way to force it to stop without just adding a stop command to the end of the queue. I’ve initiated a print a couple times and realized...
View ArticleDriving E3D V6 Fans
Is there a specific problem with the stock fans for the E3D V6 hotend ? I am not able to the fan to spin up. Is there a specific setting that may be setting PWM on the fan ? I checked two of them and...
View ArticlePower control to heated bed
Hi, I have replicape rev B and I plan to control a heated bed of 12V with a 24V power supply. Can someone please tell me if there’s a way I can control or limit the power output? I have looked in...
View ArticleGot replicape and a beaglebone (not black)
Hello, hope im not asking too much here :) I have been so fortunate to been given a replicape (r. A4A) and a beaglebone to get me started in moving machines around, now i have gotten the beaglebone to...
View ArticleManga Screen Rev B source files
Will the new Rev B manga screen be available on bitbucket? I made one of the preproduction versions myself and I would love to make the new one.
View ArticleSeemecnc he280?
Is there support for Seemecnc’s HE280 accelerometer probe? I am a complete newb and all of my google attempts have failed to turn anything up. Thanks
View Article
